Epson FX-980 - Manual (Page 41)

1
Setting Up the Printer 1-17
R4C3430
Rev. C
A5 size CHAP1.FM
5/4/99 Pass 0
R Proof Sign-off:
E.Omori _______
_______
_______
3. If your cable has a ground wire, connect it to the printer’s
ground connector as shown below.
4. Plug the other end of the cable into the computer.
After you connect the printer to your computer, install the printer
software as described in the next section.
Installing the Printer Software
After you connect the printer to your computer, you need to
install the software included on the EPSON printer software CD-
ROM shipped with your printer.
Your printer software includes:
R Printer driver
The printer driver is the software that runs, or "drives," your
printer. With it, you can make printer settings such as print
quality, resolution, and paper size.
R EPSON Status Monitor 2 (Windows 95 or 98 only)
The EPSON Status Monitor 2 notifies you of printer errors and
displays printer status information.
31run.tif