Epson FX-980 - Manual (Page 176)

A-6 Enhancing Your Printer With Options
R4C3430
Rev. C
A5 size APPA.FM
5/4/99 Pass 0
L Proof Sign-off:
_______
_______
_______
4. Hold the cut-sheet feeder in both hands and fit the feeder’s
notches over the mounting posts on the printer as shown
below. Then release the latch levers and lower the cut-sheet
feeder until it rests on the printer.
5. Insert the cable into the connector as shown above.
6. Replace the printer cover.
You are now ready to load paper in the cut-sheet feeder. To load
paper in the high-capacity cut-sheet feeder, see the next section.
To load paper in the second bin of the double-bin cut-sheet feeder,
see the manual that comes with the second-bin cut-sheet feeder.
If you installed the double-bin cut-sheet feeder, you need to select
the paper source (bin 1 or bin 2) as described on “Selecting the
paper source (bin 1 or bin 2)” on page A-11.
To remove the cut-sheet feeder, reverse the steps above.
4-4a.eps
4-2-1.eps