Epson FX-980 - Manual (Page 175)

A
Enhancing Your Printer With Options A-5
R4C3430
Rev. C
A5 size APPA.FM
5/4/99 Pass 0
R Proof Sign-off:
_______
_______
_______
Installing the high-capacity or double-bin cut-sheet
feeder
You install the high-capacity cut-sheet feeder and double-bin cut-
sheet feeder in the same way. Follow the steps below.
Note:
Before installing the double-bin cut-sheet feeder, assemble it as
described in the cut-sheet feeder manual.
w
Warning:
You will need to move the print head by hand before installing
the cut-sheet feeder. If you have just used the printer, the print
head may be hot; let it cool for a few minutes before touching it.
1. Make sure the printer is turned off.
c
Caution:
You will need to move the print head to the ribbon
installation position before installing the high-capacity or
double-bin cut-sheet feeder. Moving the print head while the
printer is on may damage the printer.
2. Remove the paper guide base and printer cover. Slide the
print head to the ribbon installation position (the indented
portion of the paper tension unit) by hand.
3. Press up the tabs on both sides of the paper tension unit and
lift it up and off the printer. If a tractor is installed in the pull
position, remove it as described on “Removing the pull
tractor” on page 2-31. Store any printer parts you remove in
a safe place.
4-1.eps