Epson FX-980 - Manual (Page 181)

A
Enhancing Your Printer With Options A-11
R4C3430
Rev. C
A5 size APPA.FM
5/4/99 Pass 0
R Proof Sign-off:
_______
_______
_______
The cut-sheet feeder automatically loads paper when the printer
receives data. Printed pages are stacked on the center support. If
you need to eject a sheet, press the
Load/Eject button.
If the first printed line on your page appears too high or low, you
can adjust its position using the micro adjust feature. See
“Adjusting the Top-of-Form Position” on page 2-38.
c
Caution:
Never use the knob to adjust the top-of-form position; this may
damage the printer or cause it to lose the top-of-form position.
Selecting the paper source (bin 1 or bin 2)
When the double-bin cut-sheet feeder is installed, you need to
select the paper source (bin 1 or bin 2) using your application or
the printer’s control panel. As shown below, the high-capacity
cut-sheet feeder becomes bin 1 and the second-bin cut-sheet
feeder becomes bin 2.
bin 1: high-capacity
cut-sheet feeder
bin 2: second-bin
cut-sheet feeder