Epson AcuLaser M8000N - Manual (Page 82)

5. Press Esc to exit PCONSOLE, and log out from the server.
6. Log in to the server as an ADMIN. Be sure to log in with NDS connection.
7. Start NWAdmin.
8. To create the Printer Object, click the container specified as the Bindery context and select Create
from the Object menu, then Printer. Type the printer name and click Create.
9. To assign the print queue, double-click the Printer object icon (created in step 8). The Printer
dialog box appears.
10. Click Assignments and then click Add. From the print queue list, select the queue (created in
step 2) and click OK.
11. Click Configuration in the Printer dialog box, and select Parallel from the Printer type
pull-down menu.
12. Click Communication. The Parallel Communication dialog box appears.
13. Select LPT1 for Port; check Polled for Interrupts; and check Manual load (Remote from Print
Server) for Connection type, then click OK.
14. Click OK in the Printer dialog box.
15. To assign the printer, double-click the Print Server object icon (created in step 4). The Print Server
dialog box appears.
16. Click Assignments and then click Add. From the printer object list, select the printer object
(created in step 8) and click OK.
17. In the Print Server dialog box, select the assigned printer from the printer object list, and click the
Printer Number button to set the printer number from 0 to 15, then click OK.
18. To confirm the objects you have assigned, double-click the Print Server object icon. Click Print
Layout , and check that the print server, printer, and print queue are connected.
Configuring for NetWare using EpsonNet Config
1. Turn on your printer.
EPSON Network Guide
How To 82