Epson AcuLaser M8000N - Manual (Page 50)

Required settings
Configure the following settings using EpsonNet Config with Web Browser.
See “EpsonNet Config with Web Browser” on page 95 for details.
❏ Importing server certificate
❏ Selecting server certificate
❏ Setting encryption strength
❏ Setting printer port
Configuring the printer port
1. Select Connect to a printer on the Internet or on a home or office network: in the Internet printing
(IPP) wizard.
2. Enter the URL using the format below.
https://IP address of network interface:443/EPSON_IPP_Printer
Windows XP
For Windows XP, the printer driver installation procedure differs depending on the printing method
you prefer. Epson recommends printing with EpsonNet Print. See “For Windows Vista/XP/Server
2008/Server 2003/2000/NT 4.0 Users” on page 103.
LPR printing
Note:
If you are using EpsonNet Print, the setup procedure is different. See “About EpsonNet Print” on page
102 for details.
1. Click Start, click Control Panel, click Printers and Other Hardware, and then click Printers
and Faxes .
2. Under Printer Tasks, click Add a printer to start the Add Printer wizard, and then click
Next .
EPSON Network Guide
How To 50