Epson AcuLaser M8000N - Manual (Page 121)

A communication error message appears when you start printing or when you open the
printer’s properties.
Cause What to do
When you print with NetBEUI or IPP, EPSON
Status Monitor cannot be used. Open the printer’s properties and then click the Optional Settings tab.
Select the Update the Printer Option Information manually radio
button. Open the printer’s properties, click the Optional Settings tab,
and then click the Notice Settings button. Clear the Monitor the
Printing Status check box.
Windows 2000/NT environment
A dial-up connection dialog box appears when printing with TCP/IP via EpsonNet Print.
Cause What to do
You have selected a phone line or modem
(for Internet Explorer 4.0x) for the Internet
connection. Printing ends normally after you cancel this dialog box, but the
message appears every time you print. Connect to the Internet using
a local area network or start a dial-up network manually.
A communication error message appears when you start printing or when you open the
printer’s properties.
Cause What to do
When you print with NetBEUI or IPP, EPSON
Status Monitor cannot be used. Open the printer’s properties and then click the Optional Settings tab.
Select the Update the Printer Option Information manually radio
button. Open the printer’s properties, click the Optional Settings tab,
and then click the Notice Settings button. Clear the Monitor the
Printing Status check box.
No clients except an administrator can print via Windows NT Server 4.0.
Cause What to do
CREATOR OWNER has been deleted from
the Printer Permissions list, or CREATOR
OWNER is set to Print or No Access. Add CREATOR OWNER by clicking the Add button in the Printer
Permissions dialog box, or set CREATOR OWNER to Manage
Documents (default setting).
EPSON Network Guide
Troubleshooting 121