Epson AcuLaser M8000N - Manual (Page 81)

2. Load the print server from the file server’s system console which the print queue volume is set.
>LOAD PSERVER print server name you set using PCONSOLE
3. Configure the network interface using EpsonNet Config. See the EpsonNet Config User’s Guide
for details.
If NetWare objects are already created, you can also use EpsonNet Config with Web Browser.
See the EpsonNet Config with Web Browser help for details.
Using Bindery Remote Printer Mode (NetWare 4.x)
Follow the steps below to make the printer environment on NetWare 4.x and IntranetWare with
Bindery emulation.
Note:
❏ Assign Trusteeships for users if necessary.
❏ Be sure to use PCONSOLE to set the print queue and print server instead of using NWAdmin.
Creating objects
1. From any NetWare client, log in to the server as an ADMIN. Make sure to log in with Bindery
connection.
Note:
If the client using for this setting has been logged in with NDS mode, press F4 key while PCONSOLE
is starting to switch to the bindery mode.
2. Run PCONSOLE. From the Available Options screen, select Print Queues and press Enter. Press
Insert and type the print queue name. Press Enter.
Note:
Since your clients need the print queue name you set here when they use the printer, announce the
print queue name to your clients.
3. From the Print Queue list, select the print queue name that you just entered and press Enter.
From the Print Queue Information list, select Queue Users and press Enter. Next, select
EVERYONE
from the list. If EVERYONE is not in the list, press Insert and select EVERYONE
from the queue user list.
4. From the Available Options screen, select Print Servers and press Enter. Press Insert and type
the print server name. Press Enter.
EPSON Network Guide
How To 81