Epson AcuLaser M8000N - Manual (Page 120)

The Model Name and IP Address do not appear in the EpsonNet Config dialog
box.
Cause What to do
If the valid IP address is not set, the items
indicated in the dialog box mentioned above
may not appear. Set a valid IP address.
Refresh the status by selecting Refresh from the View menu.
Increase the length of time before a timeout. To do this, select Options
from the Tool menu, and then select Timeout. Note that doing so can
cause EpsonNet Config to run more slowly.
An extra account is generated when using the dial-up network.
Cause What to do
NetWare is set to Enable even though you
are not using NetWare. Set NetWare to Disable on the NetWare screen of EpsonNet Config
with Web Browser.
How to acquire an IP address.
To acquire your IP address, you need to apply to the NIC (Network Information Center) in your country.
Problems Specific to Your Network Environment
Windows Me/98 environment
A dial-up connection dialog box appears when printing with TCP/IP via EpsonNet Print.
Cause What to do
You have selected a phone line or modem
(for Internet Explorer 4.0x) for the Internet
connection. Printing ends normally after you cancel this dialog box, but the
message appears every time you print. Connect to the Internet using
a local area network or start a dial-up network manually.
EPSON Network Guide
Troubleshooting 120