Extron electronic Digital Video Scaler Series DVS 304 AD - Manual (Page 6)

Table of Contents, cont’d
DVS 304 • Table of Contents TOC-ii
PRELIMINAR
Y
RGB Delay ..........................................................................................................................2-19
OSD label ...........................................................................................................................2-19
Test pattern ........................................................................................................................2-19
Enhance mode ...................................................................................................................2-19
Refresh Lock .......................................................................................................................2-19
Auto Memory .....................................................................................................................2-19
Picture-in-picture mode .........................................................................................................2-20
Changing the input ...........................................................................................................2-20
Using the swap feature .....................................................................................................2-21
Exit menu .................................................................................................................................2-21
Resetting an Input ...................................................................................................................2-21
Resetting the Unit
....................................................................................................................2-22
System Reset ...............................................................................................................................2-22
Front Panel Lockout (Executive mode) .......................................................................2-23
IR 902 Infrared Remote Control
......................................................................................2-24
Setting up the DVS to work with a Matrix switcher .........................................2-25
Using the DVS and matrix switcher after the DVS is
synchronized to the matrix switcher ....................................................................................2-27
Removing the Sync to Matrix Script .................................................................................2-28
Minimize synchronization problems without using
the Sync to Matrix feature ................................................................................................2-28
Chapter Three • Serial Communication
........................................................................3-1
SIS ™ Programmer’s Guide ......................................................................................................3-2
Host-to-scaler and scaler to host communications ...............................................................3-2
Scaler-initiated messages ....................................................................................................3-2
Using the command/response tables .....................................................................................3-2
Copyright information ........................................................................................................3-3
Password information .........................................................................................................3-3
Error responses ....................................................................................................................3-4
References to errors (at command descriptions on the following pages) .......................3-4
Symbol definitions ....................................................................................................................3-5
Command/response table for SIS commands .......................................................................3-8
Command/response table for IP control port commands .................................................3-15
Control Software for Windows ® .....................................................................................3-23
Downloading the software .................................................................................................3-23
Installing the software from a CD ........................................................................................3-23
Using the control program ....................................................................................................3-23
Using the help program .........................................................................................................3-25