Sealey HBS2001 User Manual
Page 5
The Headlamp Beam Setter is equipped with a spirit level located on the base of the optical box, which is visible through the transparent panel.
To level the box, loosen screws (fig.3.A & B) located on the side of the box and adjust the box until the spirit level registers horizontal. Re-tighten
the screws. The box level must be checked every time it is used on a different working surface.
10.1. The paint work is detergent resistant. Clean with a damp cloth, removing any stains. A small amount of alcohol may be applied to
stubborn areas of grime.
10.2. DO NOT leave the machine in areas where corrosive vapour is present, i.e. from battery charging or paint spraying etc.
10.3. DO NOT oil the column.
10.4. An optical box dust cover is available upon request.
9.
OTHER INFORMATION
10. CARE OF THE BEAM SETTER
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of the product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
HBS2001 - 2 - 061103
01284 757500
www.sealey.co.uk
01284 703534
Web