Sealey CPS03 - Manual (Page 3)

fig.5
CPS03 Issue: 1 - 23/12/14
Original Language Version © Jack Sealey Limited
4.2.2. Refer to fig.4, to fit the legs (3) making sure that the hole drilled through the leg, goes at the bottom.
4.2.3. Fit the feet, use bolt and nut ‘D’.
4.2.4. Fit the crossbraces (4) to each corner leg, using bolt and wing nut ‘E’ and a clamp at each end.
4.2.5. Place the cover over the frame, make sure that the seam that runs down the centre of the roof, is central to the frame.
4.2.6. Close the velcro straps around the frame. Use the elastic toggles, passed through the eyelets and round the frame, to secure the cover to
the frame, see fig.5.
4.2.7. Tie the ropes, that tension each end of the cover, to the corner feet, see fig,6.
fig.4
fig.6