Troubleshooting – Sealey TC966 User Manual
Page 3
5. TrOubleSHOOTiNG
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
iMPOrTaNT: no liability is accepted for incorrect use of this product. WarraNTy: Guarantee is 12 months from purchase date, proof of which will be required
for any claim.
iNFOrMaTiON: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
www.sealey.co.uk
01284 703534
Sole u.k. distributor
Sealey Group
Bury st. Edmunds
suffolk.
Web
Symptom
Possible causes
corrective action
• Claw or shovel erratic.
• External leakage.
• Binding sticking or components.
• Contact Sealey dealer for service.
• Clean and lubricate all moving parts.
• System is pressurised but the bead breaker
is not responding.
• Loose or faulty hydraulic connections/couplers.
• Oil level in pump is low.
• Pump not operating.
• Depressurise Tighten/replace
connections/couplers.
• Depressurise and fill the pump.
• Consult pump instruction manual.
• Claw will not close or shovel will not fully
extend or withdraw.
• Oil in pump is low.
• Sticking rams or binding components.
• Depressurise and fill the pump.
• Contact Sealey dealer for service.
• Bead breaker will not maintain pressure.
• Pump malfunctioning.
• Seals leaking.
• Consult pump instruction manual.
• Contact Sealey dealer for service.
• Oil leaking.
• Worn seals.
• Contact Sealey dealer for service.
• Bead breaker will not open and/or shovel
stuck or slower than normal.
• Faulty coupler.
• Pump reservoir over filled.
• Internal damage.
• Linkage binding.
• Depressurise Tighten/replace
connections/couplers.
• Depressurise and drain fluid to correct
level.
• Contact Sealey dealer for service.
• Clean and lubricate all moving parts.
tc966 Issue no. 1 - 24/11/08