Sealey ATV1135 - Manual (Page 2)

2. SPECIFICATIONS & PERFORMANCE
the AtV winch range is designed and built with the toughest jobs in mind. two models available: 1135kg or 2040kg line pull. Both models have
three stage planetary gears using oversized components for greater torque plus automatic mechanical and dynamic braking. Both feature
weather sealed solenoids and ergonomic hand control for the free spool clutch. Also supplied with units: wire rope with latched hook and 4 way
roller fairlead with mounting bracket. Plug in hand held controller, handle bar switch and mounting hardware included as standard.
Fig.1 Fig.2
Fig.3
Model no: . . . . . . . . . . . . . . . . . AtV1135 . . . . . . . . . . . . . . . . . .AtV2040
Voltage:. . . . . . . . . . . . . . . . . . . 12V . . . . . . . . . . . . . . . . . . . . . .12V
Line Pull*: . . . . . . . . . . . . . . . . . 1135kg. . . . . . . . . . . . . . . . . . . .2040kg
Motor Power: . . . . . . . . . . . . . . 800W (1.5hp) . . . . . . . . . . . . . .1kW (1.8hp)
Gear ratio: . . . . . . . . . . . . . . . . 136:1 . . . . . . . . . . . . . . . . . . . . .136:1
Line speed*:
no Load:. . . . . . . . . . . . . . . . . . 4.3mtr/min . . . . . . . . . . . . . . . . .4.0mtr/min
At Maximum Load: . . . . . . . . . . 1.6mtr/min . . . . . . . . . . . . . . . . .1.3mtr/min
current Draw:
no Load:. . . . . . . . . . . . . . . . . . 20A . . . . . . . . . . . . . . . . . . . . . .30A
At Maximum Load: . . . . . . . . . . 150A . . . . . . . . . . . . . . . . . . . . .185A
cable Ø: . . . . . . . . . . . . . . . . . . 4.8mm . . . . . . . . . . . . . . . . . . . .5.4mm
cable Length: . . . . . . . . . . . . . . 15.2mtr . . . . . . . . . . . . . . . . . . .17mtr
Winch Weight: . . . . . . . . . . . . . 8.2kg . . . . . . . . . . . . . . . . . . . . .10kg
Gross Weight:. . . . . . . . . . . . . . 13.3kg . . . . . . . . . . . . . . . . . . . .15.4kg
replacement rope Wire: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AtV2040.Wr
Dyeena rope:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AtV2040.Dr
Aluminium Hawse: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ATV2040.AH * Performance quoted at first layer of cable on drum
PERFORMANCE SPECIFICATIONS
CHART 1.
LINE PULL AND LINE SPEED vary according to how much cable is on the drum. the winch is rated at the first layer of cable on the drum.
the maximum line pull force will be reduced by subsequent layers of cable on the drum. charts 1 and 2 illustrate the maximum line force
at increasing cable layers.
CHART 2.
AtV1135, AtV2040 Issue: 2(I) - 29/01/14 Original Language Version © Jack sealey Limited