Sealey WD202 User Manual
Fixed frame crane, Wd202.v3, Instructions for

InstructIons for:
FIXED FRAME CRANE
MoDEL no:
WD202.V3
thank you for purchasing a sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
2. GENERAL
1. CONTENTS
section 2. ............................................................... General. ................................................................................................................. 1.
section 2.1 ............................................................. Identification ............................................................................................................ 1.
section 2.2. ........................................................... technical Data. ....................................................................................................... 1.
section 3. .............................................................. safety/operational Instructions. .............................................................................. 2.
section 4. .............................................................. Maintenance/Examination/Inspection. .................................................................... 3.
section 5. .............................................................. Assembly and storage. ........................................................................................... 3.
section 6. .............................................................. owner’s & operator’s responsibilities ................................................................... 4.
section 7. .............................................................. Declaration of conformity. ...................................................................................... 5.
section 8 ................................................................ Parts List/Diagrams.............................................................................................. 6,7.
Page No
.
2.1
Identification
supplier:
sealey Power Products,
Kempson Way,
suffolk Business Park,
Bury st. Edmunds,
suffolk, IP32 7Ar.
Model No: WD202.V3
2.2
Technical Data
Rated Capacity
WD202.V3
safe Working Load (sWL) 2t (tested to 50% overload).
Working Load Limit (WLL) 2t (tested to 50% overload).
MODEL. . . . . . . . . . . . . . . . . . . . . . . . . . . WD202.V3
overall height: . . . . . . . . . . . . . . . . . . . . . . .1730mm
Max. lift @ min. jib extension: . . . . . . . . . . .2770mm
Max. lift @ max. jib extension: . . . . . . . . . . .3000mm
Length (max) of frame:. . . . . . . . . . . . . . . . .1720mm
Width inside frame (max): . . . . . . . . . . . . . . .795mm
Width (max) of frame:. . . . . . . . . . . . . . . . . . .980mm
Height (max) of frame base:. . . . . . . . . . . . . .210mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180kg
Length of jib,. . . . . . . . . . . . . . . . . . . . . . . . .1320mm
Length of jib,. . . . . . . . . . . . . . . . . . . . . . . . .1470mm
Length of jib,. . . . . . . . . . . . . . . . . . . . . . . . .1610mm
Lifting capacity, Position
1: kg . . . . . . . . . . . . 2000kg
Lifting capacity, Position
2: kg . . . . . . . . . . . . 1750kg
Lifting capacity, Position
3: kg . . . . . . . . . . . . 1650kg
a) Design capability: test Load 50% overload.
b) for a description of in-service and out-of-service conditions see
section 3 safety, section 4 Maintenance and section 6.
c)
DO NOT operate the hydraulic power unit beyond its maximum
stroke as indicated on the label.
d) for applications see section 3 safety.
e) for control system, see fig.1 page 2 for release valve and pump
handle assy. usage is explained in section 3.2 operation.
f) for ground condition requirements, see section 3 safety.
g) for information on parts and materials requiring specialised repair techniques see section 4 Maintenance.
Original Language Version
WD202.V3 Issue no: 1 - 20/06/12
1610mm
3000mm
980mm
795mm
210mm
1730mm
2770mm
1470mm
1320mm
1720mm
2000kg Max.
1750kg Max.
1650kg Max.
WD202.V3
© Jack sealey Limited