beautypg.com

Contents & specification – Sealey SG101 User Manual

Page 2

background image

DANGER OF FIRE/ExPLOSION HAzARD

WARNING! The grinding process can produce streams of sparks (especially when grinding metal) which are a potential source of ignition.

DO NOT use the grinder where there are flammable liquids, solids or gases.

DO NOT allow grinder sparks to make contact with the operator’s clothing or any other fabric such as cleaning rags. Fabrics contaminated

with inflammable materials such as petrol, oil, grease, paint and solvents are a particular fire hazard.

To reduce the risk of clothing catching fire the operator should wear wool or cotton outer garments treated with a fire retardant in preference to

man-made fibres.

DO NOT use the grinder as a fixed tool, and DO NOT try to cool the grinding discs with water or other lubricants.

DO NOT hold unsecured work in your hand and DO NOT touch the grinding disc whilst operating, or whilst plugged into the mains power.

DO NOT leave the grinder running unattended and DO NOT lay the grinder down whilst it is running.

DO NOT operate the grinder when you are tired or under the influence of alcohol, drugs or intoxicating medication.

When not in use, switch off grinder, remove plug from power supply and store in safe, dry, childproof area.

Risk of Hand Arm Vibration Injury

Angle Grinder Model No. SG101.V2, SG115.V2, SG125 & SG2303.V2

when operated in accordance with these instructions and tested in accordance with EN

28662-2: 1994 results in the following vibration emission declared in accordance with BS EN12096: 1996.
SG101.V2, SG115.V2

SG125

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SG2303.V2

Measured vibration emission value: . . 1.7m/s²

Measured vibration emission value: . . 2.52m/s². . . . . . . Measured vibration emission value: . . 2.63m/s²

Uncertainty: . . . . . . . . . . . . . . . . . . . . . 0.9m/s²

Uncertainty:. . . . . . . . . . . . . . . . . . . . . . 0.7m/s². . . . . . . Uncertainty:. . . . . . . . . . . . . . . . . . . . . . 0.7m/s²

These values are suitable for comparison with emission levels of other tools that have been subject to the same test.

This tool may cause hand-arm vibration syndrome if its use is inadequately managed.

This is a ‘

NO LOAD’ vibration figure.

A competent person should carry out a risk assessment following HSE guidelines.

Measurement results can be highly variable, depending on many factors, including

the operator’s technique, the condition of the work equipment, the material being processed and the measurement method.

Recommended Measures to reduce risk of hand-arm vibration syndrome:

We recommend appropriate safety equipment is utilised and regular breaks for the operator are employed to reduce any residual risk of fatigue or repetitive strain

injury.

2. CONTENTS & SPECIFICATION

CONTENTS

1.

Main unit.

2.

Safety guard.

3.

Handle.

4.

Pin wrench.

5.

Clamping flange.

6.

Flange nut.

Remove items from packing and identify parts against fig.1. If any part is damaged or missing contact your supplier immediately.

SG101.V2

SG115.V2

SG125

SG2303.V2

fig.1D

fig.1B

fig.1A

fig.1C

Original Language Version

SG101.V2, SG115.V2, SG125, SG2303.V2 Issue: 2 - 16/02/10

This manual is related to the following products: