Sealey IR3000 - Manual (Page 4)

5.1 reflectors
the reflectors should be kept clean at all times to ensure maximum heat reflection. dirty reflectors will reduce the energy transmitted and
seriously affect the recommended drying times.
take care not to touch lamps with fingers, should you inadvertently touch them clean with alcohol.
5.2 GAs strUt MoVEMEnt
this model is fitted with a lockable gas strut, to assist in the correct positioning of the cassette heads prior to any drying.
AlWAYs depress the lever before attempting to move the cassette support arm. When in position and the spring lever is released, the
cassette assembly will be locked into place.
If the support arm is difficult to move or the arm moves downwards when the gas strut lever is depressed, a small adjustment may be
required. (this may also become necessary after the machine has been in use for any length of time)
to make an adjustment, loosen the locking nut just above the lever - then turn the centre spindle of the gas strut half a turn in a
clockwise rotation. this will adjust the pressure of the gas strut to improve operation. the ideal setting for the strut, is when the cassette
arm moves neither up or down on its own when the lever is depressed.
5. MAintEnAnCE
Original Language Version Ir3000 Issue: 2 - 14/04/10