beautypg.com

Playing back, Connections before playback, Connecting headphones – Edirol R-4 User Manual

Page 34: Connecting amplified speakers, For details, refer to, P. 34)

background image

34

Playing back

This section explains various procedures and methods by which you can play back the projects in the R-4’s
internal hard disk and the audio material you recorded on the R-4. \Make the correct settings and
connections before you play anything back.

Connections before playback

.............................. (p. 34)

Settings before playback

...................................... (p. 36)

Playing back

............................................................. (p. 38)

Headphones are a convenient way to monitor while you’re recording or immediately after recording.

1.

Turn the

[MONITOR] level knob

all the way to the left to minimize the volume.

2.

Connect your headphones to the

PHONES jack

.

3.

Slowly turn the

[MONITOR] level knob

toward the right to adjust the volume.

Here’s how to connect amplified speakers that have line input jacks or a digital input jack.

1.

Switch off the power on the R-4.

2.

Minimize the volume of the speakers you want to connect, and turn off their power.

3.

Depending on the type of speakers you are using, connect the R-4’s

[LINE OUT] line input jacks

or

[DIGITAL OUT] digital output jack

to your amplified speakers.

4.

Switch on the R-4’s power.

5.

Next, switch on your speakers, and gradually increase the volume to the desired level.

* The R-4 does not provide a way to adjust the volume of the audio that is output from its line output jacks.

Here’s how to connect a mixer or other audio device that has line input jacks.

1.

Switch off the power on the R-4.

2.

Minimize the volume of the mixer or other device you’re going to connect.

3.

Connect the R-4’s

[LINE OUT] line input jacks

to your mixer.

You’ll need separately available audio cables (not included) for connecting to the R-4’s line output
jacks.

4.

Switch on the R-4’s power.

5.

Next, switch on your mixer, and gradually increase the volume to the desired level.

* The R-4 does not provide a way to adjust the volume of the audio that is output from its line output jacks.

Connections before playback

Connecting headphones

Connecting amplified speakers

Connecting a mixer or other analog device
(analog connection: line output jacks)

R-4_e.book 34 ページ 2005年2月10日 木曜日 午後3時36分