Epson Stylus Photo RX580 - Manual (Page 19)

Reprinting Photos and Restoring Color 19
The photo(s) are scanned and restored. You see a preview on the LCD screen.
Note:
The preview does not reflect restored color.
7. If you want to crop your photo, press the Display/Crop button and adjust the
size and position of the yellow box. See page 36 for more information about
cropping.
8. If you’re copying two photos, press r to preview the second photo. Repeat
step 7 if you want to crop the second photo.
9. Press the x Print Settings button.
10. Press u or d to choose from the settings listed below, then press r. Press OK
when you are done.
■ Paper Type : choose Prem. Glossy , Ultra Glossy , Photo Paper, or
Matte, depending on the type of paper you’re using.
■ Paper Size : choose the size of the paper you loaded.
■ Layout : choose Border or Borderless.
■ Quality : this setting can’t be changed from Standard when you are
reprinting or restoring photos.
■ Color Effect : choose Off (to print in color) or B&W (to print in black
and white).
■ Expansion : When you print borderless photos, your image is slightly
expanded and cropped to fill the sheet of paper. If too much of your
photo edges are cut off, select
Mid or Min .
11. Press the x Start button to print your photo or photos.
Note:
If you need to cancel printing, press the y Stop/ Clear Settings button.
RX580.book Page 19 Thursday, July 27, 2006 4:04 PM