Epson Stylus Photo RX580 - Manual (Page 17)

Selecting Copy Settings 17
Print Settings for Copying
You can choose from various sizes and types of Epson paper and other settings to
get just the results you want.
1. Press the Copy mode button.
2. Press the x Print Settings button.
3. Press u or d to select a menu item, then press the r button.
4. Press u or d to select one of the following print settings, then press OK .
■ Zoom : Select Actual to print your photo at its original size. You can
reduce or enlarge your original by a specific percentage using the Copies
+ or – buttons. Or select Auto Fit Page for borderless printing and
resizing the image to fit standard paper sizes.
■ Paper Type : Select the type of paper you loaded. See page 28 for a list of
Epson papers and the corresponding Paper Types.
■ Paper Size : Select the paper size you loaded.
■ Quality : Select Draft , Standard or Best Quality.
■ Copy Density : Make your copies darker or lighter.
■ Expansion : When you print borderless photos, your image is slightly
expanded and cropped to fill the sheet of paper.
If too much of your photo edges are cut off, select Mid or Min. If you see
a white edge on your photo, leave it set on Standard .
Repeat Copy
Prints a photo at actual size as many times as it will
fit on one sheet.
Repeat-4
Prints a photo four times on one sheet.
Layout Setting for Copying Result
RX580.book Page 17 Thursday, July 27, 2006 4:04 PM