Eiki LC-X2U - Manual (Page 33)

Press the MODE button on the projector or the COMPUTER and
VIDEO button on the remote control unit to select Computer 1,
Computer 2, Video 1 or Video 2 Input. The “Computer 1”,
“Computer
2”, “Video 1” or “Video 2” display will appear on the screen for
a few
seconds.
Press the VOLUME buttons on the projector or on the remote
control unit to adjust
the volume. The volume display will be displayed on the screen for a few seconds.
Pressing volume (+) will increase volume and increase the number on the screen.
Pressing volume (-) will decrease volume and decrease the number on the
screen.
Pressing the MUTE button on the remote control unit will mute audio. Press the
MUTE button again to restore audio to its previous level. The mute display will be displayed on the screen for afew
seconds.
Use Top control and Wireless/Wired remote control unit.
Press the ZOOM (S) or (S) button to obtain your desired picture size. For a larger
picture, press (S) and for a smaller picture, press (T).
Use Wireless remote control unit.
Press the ZOOM button and press POINT UP/DOWN button(s) to obtain your desired picture size. The Zoom
display will be displayed on the screen for a few seconds. For a larger picture, press (UP) and for a smaller picture,
press (DOWN).
Use Top control and Wireless/Wired remote control unit.
Press the FOCUS (S) or (T) button for a sharper, crisper picture.
Use Wireless remote control unit.
Press the FOCUS button and press POINT UP/DOWN button(s) to obtain a sharper, crisper picture. The Focus
display will be displayed on the screen for a few seconds.
Use Top control and Wireless/Wired remote control unit.
Press the LENS SHIFT (S) or (T) button to obtain your desired screen position.
Use
Wireless remote control unit.
Press the LENS SHIFT button and press POINT UP/DOWN button(s) to obtain your desired screen position. The
Lens shift display will be displayed on the screen for a few seconds.