Emerson Packaged Drives and Engineered Systems - Manual (Page 13)

330
www.emersonct.com
800-533-0031
DC RapidP
ak
DC StandardPak Order Code Configurator
Product
D = DC SandardPak
Enclosure Style
P = Panel
E = Enclosure
Drive Model
N = Non-Regenerative
R = Regenerative
Voltage Rating
8 = 208 VAC
2 = 240 VAC
3 = 380 VAC
4 = 480 VAC
Amp Rating
Amps are based on drive size
Dynamic Braking 1
A = AC Input Contactor
B = DC Contactor with DB pole
Input Power
0 = None (default)
1 = Circuit Breaker (C/B)
2 = Non Fused Disconnect Switch (NFD)
(1) E-Stop Braking option requires a DB contactor and an external DB resistor.
Consult factory for DC contactor for DC drives rated 210 Amps and up.
(2) Drives 255A and greater have fixed voltage field supply.
A field current regulator is required to operate above base motor speed.
(3) For 240 VAC application requiring 240 VDC armature and 240VDC Field Voltage.
(4) To meet UL508A for industrial applications the E-Stop PB is required when door mounted devices are selected.
(5) The Fwd/Rev Selector Switch applies to regenerative drives only.
(6) Encoder feedback requires DB9 connector at drive. This option includes cable from DB9 connector to a terminal block.
Standard Enclosure is UL1 rated (NEMA 12 - PPBF (Positive Pressure Blown and Filtered))
D x x x xxx x x - xxxxxxxx
Additional Options (if required)
Fused Bower Motor Starter
1 = Range 0.4-0.65A
2 = Range 0.6 - 1.1A
3 = Range 1.0 -1.5A
4 = Range 1.3-1.9A
5 = Range 1.8-2.7A
6 = Range 2.5-4.1A
7 = Range 4.0-6.3A
Field Supply Options
A = 20A FXM-5 Field Current Regulator 2
B = 240 VDC @ 2A 3
C = 240 VDC @ 8A 3
D = 240 VDC @ 20A 3
Door Mounted Devices 4
E = E-Stop, Start PB, Stop PB, Speed Pot
F = Fwd/Rev Switch 5
H = HOA Selector Switch
J = Jog PB
K = Keypad (CTVue-303)
P = Drive Power “ON” PL
R = Reset PB
V = Analog Armature Ammeter & Voltmeter
W = Analog Field Ammeter & Voltmeter
Encoder Cable 6
Y = DB9 Encoder Cable to Terminal Block
Order String requires a minimum of 9 characters.
Examples:
Standard Order Code for Non-Regen: 200 hp @ 480 VAC, N12-(PPBF) enclosure, at 40˚ C
PN = DEN4350A0
Standard Order Code as above with the following options: Circuit Breaker, Fused Blower Motor Starter,
Field Regulator, Start/Stop PB, Reset PB, Armature Ammeter, Field Ammeter, Encoder Cable.
PN = DEN4350A1-4ARVWY
Order String