Casio PX-5S Tutorial - Manual (Page 36)

Using the Stage Setups (Tutorial)
E-35
Slider1-6 Edit >Ent
Slider 1 to 6 edit. This is a group of 4 Slider (S1) through 9 Slider (S6)
editable parameters. Editing can be performed even when the “Slider 1-6
Enable” setting is “Off”. Details of editable parameters are the same as
“Knob1 Edit >Ent”, above.
Modulation Edit
>Ent
Modulation wheel (modulation wheel edit). This is a group of 2
(MODULATION) wheel editable parameters. Editing can be performed
even when the “Wheel Enable” setting is “Off”. Details of editable
parameters are the same as “Knob1 Edit >Ent”, above.
Pedal1 Edit >Ent
Damper/Pedal 1 (Pedal1). This is a group of editable parameters for the
pedal connected to
fk (DAMPER/PEDAL 1) . Editing can be performed even
when the “Pedal1 Enable” setting is “Off”.
Pedal Target
Edit >Ent Specifies the function of the pedal connected to fk (DAMPER/PEDAL 1) .
Details of editable parameters are the same as “Target”, above.
On Rate On rate. On value change rate. 0 - 127
Off Rate Off rate. Off value change rate. 0 - 127
Pedal2 Edit >Ent
Pedal2. This is a group of editable parameters for the pedal connected to fk
(PEDAL 2) . Editing can be performed even when the “Pedal2 Enable”
setting is “Off”. Details of editable parameters are the same as “Pedal1 Edit
>Ent”, above.
Display Text Description Settings