Casio PX-5S Tutorial User Manual

Page 33

E-32

Using the Stage Setups (Tutorial)

Key Range High

Key Range High. Specifies the high range of the keyboard for each zone.
This setting is used in combination with the Key Range Low setting to
configure key ranges for each zone.
• After pressing the

(NUM KEY)

button to enter the number input

mode, you can use the keyboard keys to enter values.

C- - G9

Velo.Range Low

Velocity range low. This is the minimum velocity value of each zone. This
setting is used in combination with the Velo.Range High setting below to
configure velocity ranges for each zone.

0 - 127

Velo.Range
High

Velocity range high. This is the maximum velocity value of each zone. This
setting is used in combination with the Velo.Range Low setting above to
configure velocity ranges for each zone.

0 - 127

Volume

Volume. This setting is the same as the mixer function part volume (page
E-37).

0 - 127

Pan

Panning. Adjusts the left-right position of sound in the stereo field. This
setting is the same as the mixer function part panning (page E-37).

–64 - 0 - +63

Coarse Tune

Coarse tune. Shifts the pitch of notes by semitone units.

–24 - 0 - +24

Fine Tune

Fine tune. This setting is the same as the mixer function part fine tune (page
E-37).

–99 - 0 - +99

Bend Range
Down

Bend range down. Pitch change amount for downward bender operation.

0 - 24

Bend Range Up

Bend range up. Pitch change amount for upward bender operation.

0 - 24

Chorus Send

Chorus send. This setting is the same as the mixer chorus send (page E-37).

0 - 127

Delay Send

Delay send. This setting is the same as the mixer delay send (page E-37).

0 - 127

Reverb Send

Reverb send. This setting is the same as the mixer reverb send (page E-37).

0 - 127

Resonance Send

Resonance send. Enables/disables send to the resonance function of each
zone.

Off, On

Reso.Return
Level

Resonance return level. This setting is the same as the mixer resonance
return (page E-37).

0 - 127

Controller Edit >Ent Controller parameters. This is a group of editable controller parameters.

Knob1 Enable

Knob 1 on/off (Knob 1 enable). Enables/disables

(K1) operation for each

zone.

Off, On

Knob2 Enable

Knob 2 on/off (Knob 2 enable). Enables/disables

(K2) operation for each

zone.

Off, On

Knob3 Enable

Knob 3 on/off (Knob 3 enable). Enables/disables

(K3) operation for each

zone.

Off, On

Knob4 Enable

Knob 4 on/off (Knob 4 enable). Enables/disables

(K4) operation for each

zone.

Off, On

Slider1 Enable

Slider 1 on/off (Slider 1 Enable). Enables/disables

(S1) operation for each

zone.

Off, On

Slider2 Enable

Slider 2 on/off (Slider 2 Enable). Enables/disables

(S2) operation for each

zone.

Off, On

Slider3 Enable

Slider 3 on/off (Slider 3 Enable). Enables/disables

(S3) operation for each

zone.

Off, On

Slider4 Enable

Slider 4 on/off (Slider 4 Enable). Enables/disables

(S4) operation for each

zone.

Off, On

Slider5 Enable

Slider 5 on/off (Slider 5 Enable). Enables/disables

(S5) operation for each

zone.

Off, On

Slider6 Enable

Slider 6 on/off (Slider 6 Enable). Enables/disables

(S6) operation for each

zone.

Off, On

Bender Enable

Bender on/off (bender enable). Enables/disables

(BENDER)

operation

for each zone.

Off, On

Wheel Enable

Modulation wheel on/off (wheel enable). Enables/disables

(MODULATION)

operation for each zone.

Off, On

Pedal1 Enable

Pedal 1 on/off (pedal 1 enable). Enables/disables operation of a pedal
connected to

(DAMPER/PEDAL 1)

for each Zone.

Off, On

Display Text

Description

Settings