Casio PX-5S Tutorial User Manual
Page 13
E-12
Using Built-in Tones (Tutorial)
Resonance
Resonance. Specifies the degree of cutoff of the tone in the vicinity of
the cutoff frequency.
–64 - 0 - +63
Velocity Sense
Velocity sense. Specifies the degree of change in the filter in accordance
with change in keyboard playing touch.
–64 - 0 - +63
Envelope Depth
Envelope depth. Specifies how the envelope is applied.
0 - 127
Attack Level
Attack level. Target level reached immediately after note on.
–64 - 0 - +63
Decay Time
Decay time. Time it takes for the sound to reach the decay level from
the attack level.
–64 - 0 - +63
Decay Level
Decay level. Level the sound is sustained as long as a key or pedal is
depressed.
–64 - 0 - +63
Amp >Ent
Amp. This is a group of editable parameters associated with the amp
(volume).
• The vertical (Level) axis in the pitch envelope diagram corresponds
to the volume in the case of this group.
• For details about the setting items below, see “Pitch Envelope”.
Initial Level, Attack Time, Release Time
• For details about the setting items below, see “Filter”, above.
Attack Level, Decay Time, Decay Level
Volume
Volume. Specifies the amp volume.
0 - 127
Velocity Sense
Velocity sense. Specifies the degree of change in volume in accordance
with change in keyboard playing touch.
–64 - 0 - +63
Effect >Ent
Effect. This is a group of editable effect function parameters. For
details, see “Applying Effects to Notes” (page E-18).
DSP Edit >Ent
DSP edit. This is a group of editable effect function DSPs (page E-18).
Press the
em
(ENTER)
button to advance to the DSP editing screen
(page E-18).
Chorus Send
Chorus send. Specifies how chorus (page E-18) is applied to a tone.
0 - 127
Delay Send
Delay send. Specifies how delay (page E-18) is applied to a tone.
0 - 127
Reverb Send
Reverb send. Specifies how reverb (page E-18) is applied to a tone.
0 - 127
LFO >Ent
LFO. This is a group of editable LFO parameters applied to pitch, filter,
and amp.
Pitch Wave
FilterAmpWave
Wave type. Specifies one of the following wave types to be used for
LFO.
FilterAmpWave is shared by filter and amp.
Refer to the cell to the left.
Pitch Rate
FilterAmpRate
Rate. LFO speed (frequency). FilterAmpRate is shared by filter and
amp.
–64 - 0 - +63
Pitch Depth
Filter Depth
Amp Depth
Depth. Specifies how LFO is applied.
–64 - 0 - +63
Pitch Delay
Filter Delay
Amp Delay
Delay. Specifies the degree of delay in the timing for applying LFO.
–64 - 0 - +63
Display Text
Description
Settings
Sin
(sine wave)
Puls 1:3
(square wave 1:3)
Tri
(triangle wave)
Puls 2:2
(square wave 2:2)
Saw up
(sawtooth up
wave)
Puls 3:1
(square wave 3:1)
Saw down
(sawtooth down
wave)