Epson LT - 286e - Manual (Page 25)

4
Connecting the AC Adapter
Follow these steps to connect the AC adapter:
1. Make sure the computer’s power switch (located on the
right side of the computer) is turned off.
2. Turn the computer around so the back panel is facing you.
Position the back panel slightly over the edge of the desk or
table.
3. The end of the AC adapter cable is shaped like a box.
Notice the plastic safety cover that protects the connector
on the AC adapter. Slide the release tab in the direction
shown on the tab to release the safety cover. Lift off the
cover and store it in a safe place.
1-10 Setting Up Your System