Epson LT - 286e - Manual (Page 2)

Epson® Equity™ LT-286e
User’s Guide Corrections
Please note that your Epson Equity LT-286e provides support for an
80287 math coprocessor. Pages 2,1-17, and C-l of your User’s Guide
incorrectly refer to a CMOS 8OC287 math coprocessor. Do attempt
to install an 80C287 math coprocessor in the computer. You can install
an 8 MHz 80287 math coprocessor only.
Please note that your video display has two modes:
1. The default mode displays white characters on a black background.
Note that this is the default mode rather than the normal mode as
stated in your User’s Guide.
2. The reverse video mode displays black characters on a white
background.
You may want to use the reverse video mode, for most applications
because the black characters on a white background provide enhanced
readability. See page 2-15 in your User’s Guide for instructions.
The Equity LT-286e comes with an empty plastic box in the slot for
the hard disk drive. If your dealer has not already installed the hard
disk drive in your computer, you must remove the empty box before
you install the hard disk drive. See pages 1-3 through 1-5 of your User’s
Guide for instructions on installing the hard disk drive.
You must run the SETUP program after installing the following
optional devices:
External diskette drive
1MB RAM card
80287 math coprocessor
The SETUP program is described in Chapter 1.