Epson LT - 286e - Manual (Page 21)

3
Connecting a Printer
The Equity LT-286e has both parallel and serial interfaces
(ports). You can easily connect a printer or plotter that has
either type of interface. Just follow the instructions below. Of
course, Epson offers a full range of printer products; consult your
Epson dealer for more information.
Using the Parallel Interface
The computer’s Centronics®-compatible parallel interface
provides a 25-pin, D-shaped female connector. Most Epson
printers have parallel interfaces. To connect a printer to the
computer, you need an IBM PC-compatible printer cable. If
you’re not sure which one you need, consult your Epson dealer.
Once you. have a printer cable, follow these steps to connect
your printer to the parallel interface labeled PRINTER on the
computer:
1. Place the printer next to your computer.
2. Before you connect the printer, make sure the power
switches on the computer and printer are off. (The power
switch for your computer is located on the right side of the
machine).
1-6 Setting Up Your System