Epson LT - 286e - Manual (Page 14)

You can use any application program designed for the IBM
Personal Computer, PC XT™ or PC AT on your Equity
LT-286e.
How To Use This Manual
This manual explains how to set up and care for your Equity
LT-286e. It also describes how to use your computer and run
diagnostic checks.
The eight steps in Chapter 1 explain how to set up your
computer and prepare it for use. On the inside back cover is a
foldout with illustrations of the LT-286e; you may want to refer
to these illustrations while you set up the computer.
Chapter 2 describes general operating procedures for your
computer and explains how to use and care for your disks and
disk drives.
Chapter 3 provides basic instructions for using MS-DOS with
your computer. You can find more detailed information about
MS-DOS in the MS-DOS manuals.
Chapter 4 provides troubleshooting guidelines you can follow if
you encounter any problems while using your Equity LT-286e.
Appendix A describes the DIP switches and slide switches you
need to change if you modify your system’s configuration.
Appendix B explains how to attach an external color monitor,
external diskette drive, or keyboard to your Equity LT-286e and
how to install the Epson internal modem, the Epson RAM card,
an option card, or a math coprocessor. To install other options,
see the instructions that come with the option. For dealer-
installed options, contact an authorized Epson dealer or
Customer Care Center. (See the next section, “Where To Get
Help,” for details.)
4 Introduction