E-Tech STYLUS Pro WT7900 - Manual (Page 67)

67
Using Film and Other Media | 67
2. Press the l Paper Source button until the sheet icon appears on the
LCD display.
3. Feed the sheet into the paper slot until it meets resistance. Make sure the
right edge of the paper is straight and aligned with the vertical line on
the roll paper cover.
4. Press d. The sheet feeds into printing position automatically.
5. If you see a question on the display about paper settings, select Yes if the
settings are correct, or select No and then change the settings. Press OK
to save your settings.
6. Print your page. After it is finished, the sheet stays in the printer.
7. To remove your print, press the d button while holding the sheet.