LinPlug Spectral - Manual (Page 64)

the pre-delay.
The Feedback dial allows you to set the number of times the signal repeats
or echoes.
Next to the Feedback dial is a switch which sets the feedback either after
each left OR right delay (thats called “per stage”) or after each complete left
AND right delay. The difference between these two modes is most obvious
with feedback settings of 30% to 50%.
The Bal Pre/LR dial is used to set the balance between the initial pre-delay
and the following left and right delays. This allows you to balance the initial
delay response against all successive echoes. Or you can completely
suppress it (setting the dial all the way to the right).
The Pan Left/Pan Right dials are used to set the pan position of the left and
right delays.
Hint: If you want the delayed signal to appear on the right side first, use the
Pan controls to exchange left and right positions (moving Pan Left fully to
the right and Pan Right fully to the left).
Delay (Stereo Delay)
The Stereo delay offers separate channels for the left and right echo.
The Time Left and Time Right dials are used for setting the left and right
channel delay times (in milliseconds). This can range from 1 ms to 1300
ms.
The left and right channels of the delay's output can be independently
synced to the song's current tempo using the time display which also acts
as a Sync popup menu (see Appendix A for the range of possible sync
settings).