Linkskey LKV-9208IP - Manual (Page 88)

Prima IP User Guide Rev. 1.6
However, to use this option, you should make sure your LDAP server support SSL,
and also you have to install a distinct set of certificates – ldapcert.crt and
ldapkey.pem – onto the PRIMA IP by uploading them through the Security page.
Normally these certificates are generated by the directory server itself.
Port: Enter here the port number used in LDAP authentication. By default, it is set to
port 389.
LDAP Server: Enter here the IP address of the directory server.
Second Server (if any): If there is a second LDAP server available for authentication,
enter its IP address here.
User Base Search DN: Here you should enter the User Base Search DN, which is
typical to the LDAP server you use for authentication. By default, the User Base
Search DN is:
cn=users, dc=abc, dc=kle, dc=com
However, you should enter your own appropriate one. If you don’t know, you should
contact your LDAP server administrator.
RADIUS Server
Port: Enter here the port number used in RADIUS authentication. By default, it is set
to port 1812.
RADIUS Server: Enter here the IP address of the RADIUS server.
RADIUS server authentication: If there is a second RADIUS server for authentication,
enter its IP address here.
Password Authentication Protocol: Select the password authentication protocol to be
- 84 -