Bang & Olufsen BeoSystem 1 - Manual (Page 40)

40
You can adjust different aspects of
sound and picture using the on-
screen menu system and store the
adjustments you have made.
You can store a default volume level
via the SOUND ADJUSTMENT menu.
This determines the initial sound level
when BeoSystem 1 is switched on.
You can adjust bass, treble, and
subwoofer levels, and indicate
whether or not you want the
loudness function activated. The
loudness function makes the sound
output more dynamic at low volume
levels.
You can adjust the balance between
the loudspeakers you have
connected to BeoSystem 1. Balance
can be adjusted between left and
right speakers, as well as between
the front and rear speakers.
While you are watching television or
any other source, you can adjust the
volume at any time, or mute the
sound completely.
Finally, you can adjust and store
brightness, contrast, colour and tint
levels, if necessary.
Adjust sound and picture settings
Adjust volume or mute the sound
Adjust the volume at any time, or mute the
sound completely. Adjustments to the sound
volume are briefly displayed on the screen.
Store sound adjustments
You can store volume, bass, treble and
subwoofer levels, and indicate whether the
loudness function should be on or off.
Press ∧ or ∨ on Beo4 to adjust
the volume up or down. Volume
is adjusted in steps of two
To mute the sound, press the
middle of the ∧ ∨ button
Press ∧ or ∨ to bring the
sound back
∧
∨
VOL 32
VOL 34
VOL – –
∧
∨
VOL 34
SOUND ADJUSTMENT
VOLUME ......... ...................
BASS ...................
TREBLE ...................
SUBWOOFER ...................
LOUDNESS ON
store
While BeoSystem 1 is on…
> Press MENU on Beo4 to call up the main
TV SETUP menu.
> Press GO to call up the SOUND menu.
> Press GO again to call up the SOUND
ADJUSTMENT menu.
> Use ▼ ▲ to step to the menu option you want.
> Press ss tt to modify inputs for the chosen
option. You can adjust volume (VOLUME), bass
(BASS), treble (TREBLE), subwoofer*
(SUBWOOFER) or set the loudness function
(LOUDNESS) to ON or OFF.
> Press GO to store your settings.
Once you have completed menu operations…
> Press EXIT or a source button, e.g. TV or SAT,
to exit all menus or press STOP to back up
through previous menus.
*If a subwoofer is not connected, SUBWOOFER
cannot be adjusted. If you play a DVD disc
encoded with DTS, the menu options BASS and
TREBLE can not be adjusted.