Bang & Olufsen BeoSystem 1 - Manual (Page 30)

30
If you connect a compatible Bang &
Olufsen audio system to the
BeoSystem 1, you will obtain the
benefits of an integrated
Audio/Video system.
Your AV system – BeoSystem 1 and
your connected audio system – can
be placed together in one room, or
each system can be placed in a
separate room. Examples of various
setups are shown on this page.
If your BeoSystem 1 has been set up
in an AV system, you may need to
program it to the correct option*.
*NOTE! If you require further information about
AV setup and option programming, please
contact your Bang & Olufsen retailer.
Connect audio and video systems
Connect BeoSystem 1 to your audio
system
Using a BeoLink cable, connect the one multi-
pin plug to the socket marked MASTER LINK
on the BeoSystem 1 top connection panel, and
the other multi-pin plug to the socket marked
MASTER LINK on the audio system. For infor-
mation concerning sockets on BeoSystem 1,
please refer to Connection panels on
BeoSystem 1.
Program the AV setup – option
Option programming is done with the Beo4
remote control and with the entire system
switched to standby. The following options
are available:
Option programming for BeoSystem 1
> Hold the • standby button while pressing LIST.
> Let go of both buttons.
> Press LIST repeatedly until OPTION? is shown in
the Beo4 display and then press GO.
> Press LIST repeatedly until V.OPT is shown in the
Beo4 display and enter the appropriate number
(Option 1 or 2).
Option programming for the audio system
> Hold the • standby button while pressing LIST.
> Let go of both buttons.
> Press LIST repeatedly until OPTION? is shown in
the Beo4 display and then press GO.
> Press LIST repeatedly until A.OPT is shown in the
Beo4 display and enter the appropriate number
(Option 0, 1 or 2).
MASTER LINK
Option 2 Option 0
BeoSystem 1 and an audio system set up in one
room – all speakers are connected to
BeoSystem 1.
Option 2 Option 2
You can choose to set up your audio system
(with a set of active speakers) in one room and
your BeoSystem 1 surround sound setup in
another.
Option 1 Option 1
You can choose to set up your audio system and
BeoSystem 1 in the same room, where a set of
speakers are connected to each system.