Bang & Olufsen BeoSystem 1 - Manual (Page 17)

17
If you have connected BeoSystem 1
to a BeoVision 4 plasma screen, you
can also connect a PC to both and
gain access to the PC with your Beo4
remote control.
Use a PC with BeoSystem 1 and BeoVision 4
Connect the video signal to the BeoVision 4
plasma screen, and the audio signal to
BeoSystem 1.
– Connect the video signal from the PC to the PC
IN socket on BeoVision 4.
– Connect the audio signal to the L/R sockets on
the close-up connection panel on BeoSystem 1.
Alternatively, you can connect the audio signal
to the RIGHT and LEFT sockets in the V AUX
socket area on the rear connection panel on
BeoSystem 1. Refer to Connection panels on
BeoSystem 1 for further information about the
connection panels.
If you connect the sound signal to the V AUX
socket area, you must register your PC in the
EXTERNAL SOURCES menu. Please refer to
‘Register equipment connected to BeoSystem 1’.
Use a connected PC…
– Press LIST on Beo4 until PC appears in the
display*
– Press GO to select PC as your source
If you select PC as your source, you can not call up
the BeoSystem 1 main menu on the screen
without choosing another source first, such as TV.
Note also that adjustment of brightness, colour,
contrast or tint must be done via the PICTURE
menu, and not via the PC. Refer to ‘Adjust sound
and picture settings’ for further information.
Do not allow still pictures, such as computer
images, to be displayed on the screen for an
extended period of time, as this can cause a
permanent after-image to remain on the
screen.
Connection and use
The PC IN socket on the back of BeoVision 4 for
connection of a video signal from a PC.
NOTE! In order to display PC on Beo4, you must
first add this function to the Beo4 list of
functions. Please refer to Beo4’s own Guide for
further information.