Bang & Olufsen BeoSystem 1 - Manual (Page 14)

14
*NOTE! Do not choose the VCR as your Picture-
in-Picture source if a recording is being executed
on your VCR, as Picture-in-Picture may disrupt
your recording. BeoSystem 1 will attempt to
avoid the situation by making it impossible to
activate the Picture-in-Picture function.
While e.g. TV is on…
To move the inserted picture…
The Picture-in-Picture function allows
you to watch two sources at the same
time. One source, e.g. a TV channel,
is shown in full size, and a second
source is shown in a small window on
the screen. You can insert e.g. VCR or
DVD playback in the small window.
When you activate the Picture-in-
Picture function, a small window is
superimposed on the screen. You can
move this window around on the
screen, from one corner to another, or
swap the source in the small window
with the source shown in full size.
When the Picture-in-Picture function is
activated, the sound always follows
the source shown in full size, but
buttons pressed on your Beo4 remote
control affect the picture in the small
window.
See two sources simultaneously
Picture-in-Picture
When Picture-in-Picture is switched on and a
TV or Satellite source is shown in the small
window on the screen, you can change
channels for that source. If VCR is selected in
the window, then you can play, cue or wind
the cassette.
Press LIST repeatedly until P-IN-P
appears in the Beo4 display
Select which source to display in
the small window*
Operate this source with Beo4 as
usual
Press to swap the sources
Press LIST repeatedly until P-IN-P
appears in the Beo4 display
Use the coloured buttons to
move the picture to one of the
corners of the screen
To exit the P-IN-P function, press
the source button that
corresponds to the source shown
in the main picture
LIST
P-IN-P
SAT
V TAPE
DVD
0
LIST
P-IN-P
TV