Bang & Olufsen BeoSystem 1 - Manual (Page 39)

39
If the picture format on the screen is
not to your satisfaction, you can
instruct BeoSystem 1 to optimise the
picture format for you. You can also
choose to change the picture format
yourself.
On BeoSystem 1, picture formats are
divided into three main groups:
Format 1: For standard 4:3 picture
format. For NTSC TV sources,
choose Format 1.
Format 2: For NTSC letter-box
pictures. The picture is expanded,
and can be moved up or down on
the screen.
Format 3: For wide-screen pictures in
16:9 picture format. If the TV
source is a digital TV (DTV) input,
format 3 is selected automatically.
In this case, format adjustment is
done via the DTV menu overlay.
Please refer to Watch TV or Satellite
programmes for more information
about the menu overlay.
Adjust the picture format
Adjust the picture format if you would like a
standard, wide-screen, or full screen picture
format. You can also instruct BeoSystem 1 to
optimise the picture format for you.
Press LIST repeatedly until
FORMAT is shown in the Beo4
display
Press to optimise the picture,
or…
Press 1, 2 or 3 to select a picture
format
The format is shown on the
screen
When format 2 is selected…
Press to move the picture up or
down, or…
…you can optimise the picture in
format 2 by pressing LIST until
FORMAT is shown, followed by
GO
To exit the FORMAT function
LIST
FORMAT
GO
1 – 3
FORMAT 2
▲
▼
LIST
FORMAT
GO
EXIT