Bang & Olufsen BeoSystem 1 - Manual (Page 38)

38
When you connect additional video
sources or equipment to your
BeoSystem 1, you must register the
equipment in an on-screen menu.
This enables you to operate the
equipment with your Beo4 remote
control.
Find the type of specific video
equipment you have connected in
the EXTERNAL SOURCES menu. If
the specific equipment is not
available, then choose one of the
generic options that matches the
type of equipment you have
connected.
For information about where and
how to connect the equipment,
please refer to Connection panels on
BeoSystem 1.
*NOTE! In order to display the extra LIST
‘button’, V.AUX, on Beo4, you must add this
extra ‘button’ to the Beo4 LIST function. Please
refer to the Beo4 User’s guide for further
instruction.
Register equipment connected to BeoSystem 1
Register additional equipment
Find the name of your VCR (V.TAPE), DVD
player, Satellite receiver, or set-top box in the
EXTERNAL SOURCES menu, or register it as a
generic device type. The second choice means,
however, that while it is possible to select this
type of audio/video equipment with Beo4,
you can not operate its functions with Beo4.
EXTERNAL SOURCES
V.TAPE Panasonic PV-S7670
DVD DVD 1
V.AUX NONE
SAT Hughes Hird - B4
STB Generic RGB
store
While BeoSystem 1 is on…
> Press MENU on Beo4 to call up the main
TV SETUP menu.
> Press 6 to call up the EXTERNAL SOURCES
menu.
> Use ▼ ▲ to step to the menu option you want.
> Press ss tt to view your choices for each menu
option.
> Press GO to store.
Once you have completed menu operations…
> Press EXIT or a source button, e.g. TV or SAT,
to leave all menus, or press STOP to back up
through previous menus.
The audio/video equipment which is available on
the menu for additional sources is listed in the
enclosed Product List. Please contact a Bang &
Olufsen retailer if you require further information.
Options on the EXTERNAL SOURCES menu
V.TAPE
Choose your particular VCR, or select:
GENERIC NTSC… For an unspecified NTSC VCR.
NONE… If no VCR is connected.
DVD
Choose your particular DVD player, or select:
GENERIC NTSC… For an unspecified NTSC DVD
player.
NONE… If no DVD player is connected.
V.AUX
Choose your equipment type, or select:
GENERIC NTSC… For unspecified audio/video
equipment. You can connect a Satellite receiver
or set-top box to V.AUX. If this is the case, use
V.AUX* to select this input. On the other hand,
if this input is used for a cable box set up for
V.AUX INPUT in the RF SETUP menu, then select
the cable box via the TV button on Beo4.
NONE… If no equipment is connected.
SAT
Choose your Satellite receiver, or select:
GENERIC NSTC / HDTV… For an unspecified
NTSC or HDTV receiver.
NONE… If no Satellite receiver is connected.
STB
Choose your particular set-top box, or select:
GENERIC NTSC / YPbPr / RGB… For an
unspecified NTSC, YPbPr, or RGB set-top box.
NONE… If no set-top box is connected.