LeMond g-force UT - Manual (Page 38)

38
FCC Regulations
This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to part 14 of FCC rules. In accordance with the FCC, operation of this equipment is subject to the
following guidelines:
This device may not cause harmful interference. 1.
This device must accept any interference received, including interference that may cause undesired 2.
operation.
The
g•force UT digital
uses, generates, and can radiate radio frequency energy. If the equipment is
not installed and used in accordance to the instructions provided in this Owner’s Manual, interference
with radio communications may occur. The intent of the FCC Class B regulations is to provide reasonable
protection against interference when installed in a residential application. However, there is no guar-
antee that interference will not occur in a particular installation. If your installation does cause interfer-
ence to radio, television or other electronic equipment reception, turn off the power to the
g•force UT
digital
to verify that it is the source of the interference. If so, attempt to correct the interference by the
following measures:
Relocate the unit to increase the distance between the •
g•force UT digital
and the affected
electronics.
Reorient or relocate the receiving antennae for your television, radio or other electronic equip-
•
ment that is in the vicinity.
Consult HOIST Fitness Customer Service, your authorized dealer, or a qualified radio/television
•
technician for help.
This product has also been tested and certified to meet the following standards:
CAN/CSA 22.2 No 68 •
UL 1647 •
ASTM F1250 •
ASTM F2276 •
EN 957-1 •
EN 957-5 •
EM 60335-1 •
It has also been tested to United States, Canadian and European requirements for:
Radiated Emissions •
Radiated Immunity •
Static Electricity Immunity •
APPENDIx