LeMond g-force UT - Manual (Page 18)

18
a feW addiTional TiPS aboUT THe fUncTionS of THe diSPlay conSole:
• You can easily change the resistance level of a workout after the program is running. Using the +/–
Keys, increase or decrease the resistance to suit your needs. Doing so changes the resistance through-
out all segments of the program.
• The duration of a workout can be changed before a program begins running but not during the
program. To change the duration once a program is running, you will need to exit the program and
restart it after entering in the desired duration.
• During a workout, the MESSAGE DISPLAY will scroll through the statistics of your current workout.
• At the completion of a workout, the MESSAGE DISPLAY will summarize statistical information from
the workout you have just completed such as total distance, and total time. These statistics are also
displayed if the workout has been ended prematurely.
• Pressing STOP during a program will pause the program. To restart the workout, simply press ENTER
and the workout will resume at the segment where it was paused. If no action is taken within 15
seconds of a program being paused, the display console will switch to a resting mode. After two
minutes the display console will turn itself off.
• If you stop pedaling during a workout, the display console will behave in the same manner as if you
had pressed the STOP key.
• You can change the units that distance is measured in from miles to kilometers (km), by pressing
the ENTER, BACK and MANUAL keys simultaneously. Use the +/– Keys to toggle between UNITS USA
(miles) and UNITS METRIC (km).
• You can change the Date by pressing the ENTER, BACK and HILL keys simultaneously and using the
+/- Keys to adjust.
• You can change the Time by pressing the ENTER, BACK, and TIME keys simultaneously and using the
+/- Keys to adjust.
• You can change the Beep Volume by pressing ENTER, BACK, and + or - simultaneously.
• The console is powered by rechargeable batteries that charge as you pedal. If the console will not
power on pedal for a few minutes to charge the batteries.
OPERATING THE DISPLAY CONSOLE