LeMond g-force UT - Manual (Page 32)

32
The
g•force UT digital
was designed to be an attractive, effective and safe method for realizing your
fitness goals. Durable and high performance components were a key design feature of the g•force UT
digital. The safety level achieved by the design, however, can only be maintained when the equipment
is regularly examined for damage and wear. Inoperable or worn components should be replaced im-
mediately and the equipment should be put out of use until it is repaired. Read all maintenance instruc-
tions thoroughly before beginning work. Maintenance is the sole responsibility of the owner.
Initial Service
Choosing a cool and dry location for the g•force UT digital will extend the lifetime of the equipment
and increase your enjoyment while using the bike. After assembling the equipment, use a soft cotton
cloth to remove any dust or residue that may have accumulated during shipping. Regular maintenance
will keep your bike in good working order. No calibration is required by the user.
Maintenance Tips
• Always use a soft, cotton cloth and dilute non-abrasive cleaner or a mild detergent for cleaning the
exterior of the bike.
• Never use ammonia, acid-based, or petroleum-based solvents on any portion of the bike as it may
damage the finish.
Preventative Maintenance Schedule
Daily
• Before each use, make certain that the area around the bike is free of obstacles and any clutter that
may interfere with the pedal rotation.
• Before each use, check that pedals are securely tightened and inspect both pedals and pedal straps
for wear.
• After each use, wipe down the surfaces of the
g•force UT digital
to remove sweat and moisture.
• Wipe the face of the display console with a slightly damp, soft, cotton cloth. Avoid getting extra mois-
ture on the display console. Keeping the display console free of fingerprints and sweat will extend the
life of the console.
!
WARNING: When used in a club setting it is critical that the pedals be checked after
each class to ensure proper installation. Failure to do so may result in property
damage and/or rider injury.
MAINTENANCE INSTRUCTIONS