Lanner IPMI - Manual (Page 7)

Version 1.0
5
Chapter 1
Introduction
1. About the IP KVM-IC2300
The IP KVM-IC2300 contains a powerful software stack combining the functionality of a Service Processor
and of a Baseboard Management Controller (BMC). The software implements IPMI 2.0 and KVM/IP based on
the service processor. It performs all the BMC management tasks defined by IPMI 2.0, which acts as a
service processor, allows for video redirection and remote monitoring using KVM over LAN. For remote
access, it runs an embedded web-server to provide a web management interface. It also runs a remote
desktop service for direct access to the system’s desktop. The following section provides a list of software
capabilities.
2. Features
IPMI Message Interface Support
• KCS (System Interface Support)
• IPMB
• LAN
• USB
Media Redirection
• Simultaneous floppy, Hard disk or USB and CD or DVD redirection.
• Efficient USB 2.0 based CD/DVD redirection with a typical speed of 20XCD.
• Support for USB key
• Completely secured (Authenticated or Encrypted) remote KVM or vMedia.
IPMI 2.0 based management
• BMC stack with a full IPMI 2.0 implementation
• Customizable sensor management
Event Log and Alerting
• Read Log events
• Sensor readings