Lanner IPMI - Manual (Page 34)

Version 1.0
32
1. Select a slot and click Modify to modify the configuration of the service. Alternatively, double click on the
slot.
NOTE : When the configuration is modified, the service will be restarted automatically. User has to close the
existing opened session for the service if needed. This opens the Modify Service screen as shown below.
2. Service Name is a read-only field.
3. Activate the Current State by enabling the Activate check box.
4. Choose any one of the available interfaces from the Interface drop-down list.
5. Enter the Nonsecure port number in the Nonsecure Port field.
6. Enter the Secure Port Number in the Secure Port field. Enter the timeout value in the Timeout field. For web,
SSH and telnet service, user can configure the session timeout value.
7. Enter the maximum number of sessions allowed in the Maximum Sessions field.
8. Click Modify to save the entered changes or Cancel to exit and return to the Services Page. .
5.8 SMTP Settings
Simple Mail Transfer Protocol (SMTP) is an Internet standard for electronic mail (e-mail) transmission across Internet
Protocol (IP) networks.