Lanner IPMI - Manual (Page 42)

Version 1.0
40
To add a new user, follow these steps:
1. Click on a free slot and click the Add User button.
2. Enter a name for the user in the User Name.
Note : -The User Name should contain 4 to 16 alpha-numeric characters.
-It must start with an alphabetical character and must be case-sensitive.
- Special characters like '(comma), '.'(period), ':'(colon), ';'(semicolon), ' '(space), '/'(slash), '\'(backslash), '
('(left bracket) and ')'(right bracket) are not allowed.
3. Enter the Password in the Password field. And retype the password again to confirm the password.
Note : The password should be at least 8 characters and no longer than 20 characters. No space is
allowed.
4. Check the box to enable or disable the User Access privilege.
5. Select the privilege level for the network privilege. The users has the following privilege level:
User : The User group can only access the Dashboard and Server Health menus with read-only privilege.
Operator : The operator group can access all menus but cannot modify any configurations.
Administrator : All menus can be accessed and all configurations can be modified on the menu including
the console redirection function.
OEM Proprietary: The user access level defined by OEM.