Lanner IPMI - Manual (Page 52)

Version 1.0
50
Refresh Video : This option can be used to update the display shown in the Console Redirection window.
Compression Mode : Select the compressions /decompresion algorithm. The default is YUV444+4ColorsVQ.
DCT Quantization Table : Select the video quality of the client screen display. The default is 4.
Host Video Output : If you disable this option, the host server display will be blank but you can still view the screen in
Console Redirection. If you enable this option, the display will be back on the server screen.
Full Screen : This option is used to view the Console Redirection in full screen mode (Maximize). This menu is
enabled only when both the client and host resolution are same.
Exit : This option is used to exit the console redirection screen.
8.2 Keyboard
This menu contains the following sub menu items.
Hold Right Ctrl Key
: This menu item can be used to send the command of holding the right-side key in
Console Redirection.
Hold Right Alt Key : This menu item can be used to send the command of holding the right-side key in
Console Redirection.
Hold Left Ctrl Key : This menu item can be used to send the command of holding the left-side key in
Console Redirection.
Hold Left Alt Key : This menu item can be used to send the command of holding the left-side key in Console
Redirection.
Left Windows Key : This menu item can be used to sned the command of pressing the left-side key in
Console Redirection. You can also decide how the key should be pressed: Hold Down or Press and Release.
Right Windows Key : This menu item can be used to send the command of the right-side keyn in Console
Redirection. You can also decide how the key should be pressed: Hold Down or Press and Release.
Alt+Ctrl+Del : This menu item can be used to send the reboot command –holding down , and
to the server that you are redirecting.
8.3 Mouse
Show Cursor : This menu item can be used to show or hide the local mouse cursor on the remote client system.
Mouse Calibration : This menu item can be used only if the mouse mode is relative.
In this step, the mouse threshold settings on the remote server can be configured. The local mouse cursor is
displayed in RED color and the remote cursor is shown on the remote video screen. Both cursors will be synchronized
at the beginning. Please use '+' or '-' keys to change the threshold settings until both cursors go out of synch. Note the
first reading on which cursors go out of synch. Once this is detected, use 'ALT-T' to save the threshold value.
8.4 Options
Bandwidth : The Bandwidth Usage option allows you to adjust the bandwidth. You can select one of the following:
„ Auto Detect - This option is used to detect client system keyboard layout automatically and send the key event