Lanner IPMI - Manual (Page 31)

Version 1.0
29
5.6.3 LAN Destination
This page will let you configure the LAN destination to send the filtered event based on the rule set by the above
Alert Policy Set.
The fields of the LAN Destination entries are explained below:
LAN Destination : Displays Destination number for entry (read-only).
Destination Type : Destination type can be either an SNMP Trap or an Email alert.
Destination Address : If Destination type is SNMP Trap, then the displayed IP address will receive the alert.
Destination address can support the following IP address format:
- IPv4 address format.
- IPv6 address format.
If Destination type is Email Alert, it will display the email address that will receive the alert message.
To add an LAN Destination entry, follow these steps: