Ion Science Hydrosteel 6000 - Manual (Page 35)

Hydrosteel 6000 MANUAL Ion Science Ltd
Page 35 of 39
Unrivalled Detection. www.ionscience.com
Appendix A
Hydrosteel 6000 LT-R Technical Specifications
Dimensions
Analyser:
320 x 60 x 50 mm
Probe extension: 15 cm high x 150 mm dia.
Collector: 20 cm high x 150 mm dia.
Power requirements
Batteries:
4 x 1.5 V AA alkaline
Time operable with batteries: 30 hr occasional, 40 hr continuous Monitoring
Environmental operating conditions
Ambient temperature range:
15 °F to 120 °F (-10 °C to +50 °C)
Test gas humidity tolerance: continuous 15% to 100% non- condensing, <15% for a few
hours
Measurement surface: Steel of >3.5-inch diameter cross section.
temperature range < 230
°
F (110 °C)
265

F (130

C) is possible for quick spot measurements
only.
Test gas pressure tolerance: ±5% ambient pressure