Ion Science Hydrosteel 6000 - Manual (Page 12)

Hydrosteel 6000 MANUAL Ion Science Ltd
Page 12 of 39
Unrivalled Detection. www.ionscience.com
Using Hydrosteel 6000
Connecting the High Temperature roaming (HT-R) probe to the analyser using HT-R very HT extension
conduit.
1 Remove HT-R collector assembly from the box and remove the magnet sleepers.
2 Manually unscrew the collector handle from the assembly. (The handle unscrews below the white heat
shield).
3 Insert the HT-R very HT extension conduit assembly (A-41017) through the handle as shown below.
Tighten the nut onto the collector plate until it is finger tight. Screw into place the HT-R handle.
4 The HT-R very HT extension conduit assembly is connected to the analyser using the HT-R 2ft flexible
conduit assembly (A-41019) as shown below.