Ion Science Hydrosteel 6000 - Manual (Page 11)

Hydrosteel 6000 MANUAL Ion Science Ltd
Page 11 of 39
Unrivalled Detection. www.ionscience.com
Using Hydrosteel 6000
Connecting the high temperature roaming (HT-R) probe to the analyser using HT-R flexible conduit
1 Remove HT-R collector assembly from the box and remove the magnet sleepers.
2 Manually unscrew the collector handle from the assembly. (The handle unscrews below the white heat
shield).
3 Insert the HT-R 2ft flexible conduit assembly (A-41019) through the handle as shown below. Tighten the
nut onto the collector plate until it is finger tight. Screw into place the HT-R handle.
Probe plate
locking screw
Collector
handle
HT-R gas sample
tube
Probe plate
locking screw
HT-R gas sample
tube Collector
handle
Collector
handle
Probe bracket
HT-R gas
sample tube