beautypg.com

Declaration of conformity – Ion Science Hydrosteel 6000 User Manual

Page 3

background image

Hydrosteel 6000 MANUAL

Ion Science Ltd

Page 3 of 39

Unrivalled Detection. www.ionscience.com

Declaration of conformity


Manufacturer: Ion Science Ltd, The Way, Fowlmere, Cambridge, England. SG8 7UJ

Product: Hydrosteel 6000

Product description: the ultimate portable monitoring tool for sour, HF and high temperature corrosion and
diffusible hydrogen damage in steel. The intrinsically safe instrument is totally non-intrusive and with minimal
test surface preparation, and no consumables such as grease required, reliable measurements can be made
within a minute.

Marking:

ll 2 G Baseefa 02ATEX0093 Ex ia IIC T4 -20

C

Ta

+60

C

Ref Baseefa Cert Report

05©0007, 07©0772

Baseefa Certificate number Baseefa02ATEX0093 Issued 28 of August 2008

Notified body: ATEX: Baseefa 2001 Ltd, Rockhead Business Park, Staden Lane, Buxton, Derbyshire,

SK17 9RZ


Notified body No:
EC 1180

Directives: 94/9/EC

ATEX 100A

89/336/EC

EMC


Standards: BS EN 13908:2002

ATEX

– Application of quality systems

BS EN 50014:1998

ATEX - general requirements

BS EN 50020:2002

ATEX

– Intrinsic safety “i”

BS EN 61010-1:2010

Safety requirements for measurement, control & lab equipment use

BS EN ISO 9001:2008 Quality management systems

BS EN 61326-1:1997

EMC

– Equipment for measurement, control and laboratory

I the undersigned hereby declare that the equipment specified above conforms to the stated Directives and
Standards.

Signed By:

Name: Mark Stockdale,
Position: Technical Director
Date: 23

rd

April 2007

Safety: This intrinsic safety rating permits its deployment in all potentially explosive atmospheres of the
quoted (or less demanding) rating. That is, in areas where explosive gases (of Group IIA, IIB and IIC) are
intermittently present (Zone 1); within an ambient temperature range of -20

C and +60

C.


Hydrosteel complies with the requirements of 73/23 EEC low voltage directive and, apart from a low voltage
pump, there are no moving parts within the instrument so that the machinery directives are not applicable.